Next: Setting up the Serial
Up: Configuring the Networking Hardware
Previous: The PLIP Driver
SLIP (Serial Line IP), and PPP (Point-to-Point Protocol) are a widely
used protocol for sending IP-packets over a serial link. A number of
institutions offer dial-up SLIP and PPP access to machines that are on
the Internet, thus providing IP-connectivity to private persons
(something that's otherwise hardly affordable).
To run SLIP or PPP, no hardware modifications are necessary; you can use
any serial port. Since serial port configuration is not specific to
TCP/IP networking, a separate chapter has been devoted to this. Please
refer to chapter- for more information.
Thu Mar 7 23:22:06 EST 1996